Technical Selection IG-M-LB (in German only)
5.2.3. Induction unit for mixing ventilation IG-M-LB, for horizontal floor mounting
Induction unit for cooling, heating, and fresh air supply along the building facade, via a raised floor, providing a high level of thermal comfort.
|Primary air volume flow rate||4 – 36 l/s [15 – 130 m³/h]|
|Cooling capacity (total)||max. 1 320 W|
|Cold water temperature||15 / 17 °C|
|Heating capacity||max. 1 200 W|
|Hot water temperature||50 / 40 °C|
|Heating capacity with self-convection||350 W|
|Nominal unit width||1 200 mm (available 800, 900, 1 200, 1 350, 1 600 mm)|
|Grille depth||380 or 500 mm|
- Low pressure loss (70 to 200 Pa), therefore energy-saving operation
- Low sound power level
- Heating also possible without primary air, which saves energy when heating at night and at weekends
- Heat exchanger cleanable from the top or the bottom (in compliance with requirements of VDI 6022). The large fin spacing enables easy cleaning and obviates the need for a filter.
- Suitable for new or refurbished buildings